Fluid and viscous products filling station DIS-386

The DIS-386 filling station allows you to transfer low to mid viscosity products from 12oz cartridges retainer 12oz SLOTTED CARTRIDGE RETAINER BODY – DISPENTECH to 3cc, 5cc, 10cc and 30cc cartridges. SMALL CAPACITY CARTRIDGES – DISPENTECH

Click here to download the technical data sheet. 

Click here to see the demonstration video.

The equipment is delivered as per picture with its retainer, 1 empty 12oz ( 350cc/ml) cartridge and piston and 1 empty 3cc, 10cc or 30cc cartridge and piston.

You can always purchase additional sets of cartridges and pistons at per links below: 

SMALL CAPACITY CARTRIDGES – DISPENTECH

LARGE CAPACITY CARTRIDGES – DISPENTECH

The environmental concerns to lower plastic into companies as much as purchasing their consumables at a cheaper price at their suppliers and the easy the handling are all reasons to acquire a transfer station DIS-386 model.

It loads a barrel directly from a 12oz (355cc/ml) cartridge. This barrel loader is connected to an air regulator and set to a pressure suitable for the material but less than 100psi (7 bar). A foot pedal or a manual lever between the cartridge and the syringe allows fluid flow and is switched off when the material reaches the desired level. It will run directly from a compressed air supply. AIR COMPRESSORS AND ACCESSORIES – DISPENTECH

You could connect such a dispenser CARTRIDGE DISPENSERS – DISPENTECH if you wish to control the quantity you dispense into cartridge with regularity using the automatic mode of the dispenser by setting a dispensing duration on the displayer.